![cnc4youUK](/img/default-banner.jpg)
- 44
- 796 657
cnc4youUK
United Kingdom
Приєднався 5 лют 2011
NC STUDIO TO MACH3 CNC CONVERSION BOX
This control box will allow you to use a modern PC or Laptop with Ethernet connection to control your NC Studio controlled router etc. We have a Plug & Play kit with Laptop with Tool Height and semi=automatic tool change, also a 3D probe for edge and corner finding and calibration software see Videos.
www.cnc4you.co.uk/Machines/NC-STUDIO
ua-cam.com/video/RbydSAKcqKQ/v-deo.html
ua-cam.com/video/DPYjAcJZT6U/v-deo.html
ua-cam.com/video/AzxL8AOrXXQ/v-deo.html
www.cnc4you.co.uk/Machines/NC-STUDIO
ua-cam.com/video/RbydSAKcqKQ/v-deo.html
ua-cam.com/video/DPYjAcJZT6U/v-deo.html
ua-cam.com/video/AzxL8AOrXXQ/v-deo.html
Переглядів: 135
Відео
CNC Mill Repeatability Test our MM25L MM32L CNC Milling Machine
Переглядів 2719 місяців тому
Short video showing the repeatability of our CNC Mills due to machine being on a poor surface hard to show the real accuracy as machine moved a lot.
Fusion 360 Mach3 Post Processor for MM32L and MM25L CNC Mills Part 1
Переглядів 1,1 тис.10 місяців тому
Short video which shows typical settings for Fusion 360 post processor when using Mach3 software. used when generating code for our CNC Mills
Stepper Mount MM25L Mill Fusion 360 CNC Mill CNC4YOU LTD.
Переглядів 84411 місяців тому
Stepper Mount MM25L using code generated from Fusion 360. Hopefully you can hear how quiet machine is especially spindle noise using brushless motor and belt drive. www.cnc4you.co.uk/Machines/CNC-Mill/MM25L-CNC-PP and www.cnc4you.co.uk/Machines/CNC-Mill/CNC-MILL-MM32L-CNC-PP
4th Axis Rotary or Indexer Axis CNC Mill CNC4YOU LTD.
Переглядів 988Рік тому
4th Axis for a rotary Axis for machining or used as indexer. This is setup on our MM25L or MM32L Series Milling Machine and can be supplied setup with our control box with an additional driver.
Probing Video CNC Mill CNC4YOU LTD.
Переглядів 480Рік тому
Probing routine using our 3D probe these routines are designed to make the use of our MM series mill more productive and easier to setup and use. Link to our MM32L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/CNC-MILL-MM32L-CNC-PP and MM25L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/MM25L-CNC-PP
Probe Calibration CNC Mill CNC4YOU LTD.
Переглядів 388Рік тому
Probe calibration without the need for accurate centre finders and expensive gage rings. Link to our MM32L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/CNC-MILL-MM32L-CNC-PP and MM25L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/MM25L-CNC-PP Hope this helps your working experience with our MM Series milling Machines namely MM32L and MM25L.
M6 Tool Change Routine for our MM32L & MM25L CNC Mill
Переглядів 288Рік тому
M6 Tool Change Routine for our MM Series Mills Link to our MM32L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/CNC-MILL-MM32L-CNC-PP and MM25L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/MM25L-CNC-PP Please ignore Tool Zero should Tool 2 sorry about that. We normally start cutting 0.3mm above stock surface.
Tool Change position set MM32L & MM25L CNC Mill
Переглядів 277Рік тому
Simple routine so you can define the tool change position where tool lengths are calculated and adjusted. Link to our MM32L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/CNC-MILL-MM32L-CNC-PP and MM25L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/MM25L-CNC-PP
Wireless Tool Height Calibration MM32L & MM25L CNC Mill
Переглядів 407Рік тому
Short Video showing Gage height setup using our wireless tool height. Care needs to be taken to never have higher value as this will result in tool going into material rather than just above. Typically we have this set to -0.05mm when DRO reads 0.00. Link to our MM32L www.cnc4you.co.uk/Machines/Milton-Machines-Mills/CNC-MILL-MM32L-CNC-PP and MM25L www.cnc4you.co.uk/Machines/Milton-Machines-Mill...
PCB Milling Eagle Software on our EMR8060ATC Auto Tool Change Router
Переглядів 1,2 тис.4 роки тому
Just a simple video cutting the tracks on some low quality PCB boards we had laying around. As always not optimised just modified example board from Eagle software and used pcb-gcode for generating the .nc file for cutting the tracks. Hopefully time prevailing we can show a better quality video. thanks for watching.
WARCO CNC Ballscrew Conversion with Electronics and Stepper motors Under Power Test
Переглядів 3,8 тис.4 роки тому
This is a full Ballscrew conversion to limit backlash problems with standard lead screws. This shows our Warco CNC Conversion running a test program which happens to be Y Axis conversion block. See link for our machines. www.cnc4you.co.uk/Machines
WARCO CNC Mill Ballscrew Conversion with Electronics and Stepper motors WM 18
Переглядів 2,4 тис.4 роки тому
CNC Conversion of Warco WM18 Mill see link www.cnc4you.co.uk/Machines This is a full Ballscrew conversion to limit backlash problems with standard lead screws. Simple home sequence comes in at about 900mm/min and then backs of and goes in at 1% of top speed defined by Mach3. We will be offering mechanical and electrical kits or pre-converted machines in early january 2020
ATC Rotary Slot Probing for Tool Changer
Переглядів 1,7 тис.4 роки тому
ATC Rotary Slot Probing for Tool Changer
Using Edge Finder and zeroing X and Y Axis
Переглядів 2,1 тис.4 роки тому
Using Edge Finder and zeroing X and Y Axis
CNC Machining V8 Engine Block with 4th Axis
Переглядів 24 тис.4 роки тому
CNC Machining V8 Engine Block with 4th Axis
Mach3 Installation and Basic Configuration
Переглядів 46 тис.5 років тому
Mach3 Installation and Basic Configuration
do you have mittens on?
Thanks for the video. I have a mach3 cnc for wood works. I have a strange issue with fusion360. Post process file is preloaded for mach3 I choose that one. I load gcode to the mach3 mill start cycle after reset axises the machine only drills and stops after gcode sequence ends. Everything seems ok but behaviour of cnc is just like this. I dont have same problem with artcam but I’d rather to use fusion360 not the artcam
So usefull ! Thank you
I am looking to implement just homing switches and set soft limits instead of wiring hard limit switches. It seems a solution as long as the machine is homed every time it is powered up. What are your thoughts please?
Great video. So useful. Thanks
ua-cam.com/video/nIKRilqaQJQ/v-deo.html rsrs
gostaria muito de enteder a fundo o mach3 teria como voce espicar um pouco mais de vagas
hello Sr, do you have an email, so I can request for a quote ?
I find your videos really informative, although pretty hard to follow as at 480p resolution the texts are not really readable.
Hi, i hope someone can help me? I have installed MACH-3 on my laptop bur for some reason when i plug my CNC USB in it doesnt find the CNC. I have watched lots of videos but i cannot get it to work at all. If i plug anything else in such as a printer, it show straight up. But when i plug my CNC in there is not even a sound or anything. I have even tried a PC and same result. Machine is turned on but it's just not recognised. My CNC is an AR2400
god
my MDI is not working. I am writing G0X20 as you, but there is no move or number change in the screen. Both X and Y axis. what can be the reason ?
I have tried this, but the gcode always references g54, so even when I am in the g55 offset and hit run, the machine will move to the location stored in G54. Can the gcode be changed so it does not reference g54 and can run in your selected off-set location?
Low quality video. Dislike.
Good Job buddy
very nice could you show over larger distances (full table travel and back perhaps) maybe share the g code to those of us that are learning thanks in advance love the content
Thank you for the beautiful film and explanation. I have been looking for a long time how to put mach3 on 6 axes. Can you explain this to me? Thanks in advance.
Great information and really good quality products and customer support.....not the cheapest but is excellent and real people that you can reach out to .
Really glad you got your machine up and running.
Brian, thank you for helping me get into using Fusion with Mach 3.
glad you found it useful
Promo SM 🙏
Great video and thanks for sharing
Glad you found it useful
It’s wonderful to see the machine in action. Can you provide some information on how to configure the post processor In fusion 360 to work with the mill and Mach3. I think fusion 360 is definitely the weapon of choice given its capabilities but it is a steep learning curve. So looking forward to making my first chips
Well done buddy
Thanks Dave, how is the electronics upgrade going for your lathe.
Great job sir thanks 😊
Great job sir thanks
Great job sir thanks
Great job sir thanks, after a long time
Great job sir thanks
Great job sir thanks
Hi am Edward from Zambia am using cnc plasma cutting machine
Hi can you help I have set up gang tooling on my lathe, and was wondering how I set a drill up to the master in the tool table, and also how to get them to change from one tool to another without me standing there pressing the cycle start
After my lovely conversation with Brian the other day I thought I'd give these a watch am glad I did.. I look forward to seeing the how to videos and learning more from you all. Great video, thank you
Thanks.
how much and where do i buy
Hello, we are just finalising the design and documentation for this product, pricing will also be shown soon it will be listed under our new items menu link there. www.cnc4you.co.uk/NEW thanks.
Looks like a very nice 4th axis, compact and sturdy. 👍 Is that your own screen set with 6 axis? I use Mach3 with the usual 4 axis screen set. Cheers Ian
Hello Ian, this is our custom screen set which has screens for semi-automatic tool change routines and probing and calibration routines.
12mm plate am not cutting through
Hey assist me
"Zed motor"..?
I don't get it. My active lows are checked green, yet led's light up. Mine's backwards from this. Why? (also I still haven't been able to turn a servo) I see he's making money off the video with ads but nobody gets questions answered here! great
I have China 6012S but Y Axis problem 90mmx90mm Area Clearance toolpath, the machine 90mmx178mm, it's Oval Shape. How can I do, Sir?
A g28 command is crash into the bit into my work piece. g28's z is below my work Z. How can I fix that?
thank you for sharing.I learn a lot .
I'm running mach3 041 on pc with GT220 1GB memory with default setting and all works well but, I don't have 3d part in screen. could some1 tell me how to fix it?
THANKS!!! Im building a highly customized machine and I think this will work for my application. If z axis gets to close to object, a capacitive sensor triggers true and I want program to pause feed of program, then adjust z axis up a small incriment (say .5") and continue program. You think the brain is a good fit for this?
building a cnc plasma, i’m getting all the electronics put together 1 axis at a time. Motors function properly when using the mill profile, but no matter what i try i get no moment from the steppers when i switch over to the plasma profile. I’ve been pulling my hair out for hours now and i cannot figure out why. Any ideas?
I have a question for you I bought a Chinese cnc machine I have mach 3 I also have uc100 I have blue and green it says it's working correctly but the motors are not I followed your setup hitting tab motors still not working any suggestions thanks I'm self taught and not a very good teacher thanks
Hello sir, Its very interesting am daily watching this video.i need this prototype ATC and macro and wiring circuit.please sir give me that.i will practice
I have 2 machines running the same version of Mach 3 turn, but the one machine isn’t reading the macros we wrote like the other machine is.
Hello sir, Your atc is very smart prototype..can you give me that atc macro and wiring please
Very excellent brain and idea...can you give me the design and marco and wiring..its very help full for me..
Hi with this model Warco did you have to remove any material from the back of bed or sadle to fit the ball screw nuts? What size ballscrews have you used?
看来你们都缺伺服电机,中国基本上没人用步进电机了。